These #14 Metal to Wood Screws will work for most mechanically fastened applications when screwing into a wood purlin, frame or truss. A type A tip should allow you to go through the metal panel smoothly.
Please note: Type A SST screws do not have the cut out in the tip as shown in the picture.
With a 3/8" Hex Washer Head, when the screw is used in conjunction with our SB-190 silicon adhesive, it will provide a good seal to keep water out from under the guard.
When calculating the quantity needed, we recommend 4 per guard using the outside 4 holes in the guards.
Screws are available individually or pre-packaged in bags of 50 at a reduced price.
Please Note: The installer should make the final selection for any attachment screws as the substrate you are installing into is one of the primary determining factors for screw choice.